* This item is not currently in stock, orders will be fulfilled when the item becomes available.
Module A-190-8 Midi/USB to Sync interface. The main application of the module is the control of clocked A-100 modules like sequencers (A-155), sequencer controllers (A-154), trigger divider (A-160 or A-163), trigger sequencer (A-161) and similar units. It may be used also to reset or sync LFOs (e.g. A-145, A-147, A-143-4) or to trigger envelope generators (A-140, A-141-2, A-143-1, A-143-2) with a fixed clock rate.
These are the most important features of this version of the module:
- Midi input (recognises only Midi realtime messages clock, start, stop and continue)
- USB input for Midi via USB
- Clock outputs:
-
- 96: outputs the Midi clock 1:1 (96 pulses per measure/ppm or 24 pulses per quarter note/ppq)
-
- 32: outputs the Midi clock divided by 3 (32 pulses per measure/ppm or 8 pulses per quarter note/ppq)
-
- 16: outputs the Midi clock divided by 6 (16 pulses per measure/ppm or 4 pulses per quarter note/ppq)
-
- 8: outputs the Midi clock divided by 12 (8 pulses per measure/ppm or 2 pulses per quarter note/ppq)
-
- 1: outputs a pulse at the start of each measure
- Other outputs:
-
- Start: outputs a pulse at each Midi Start or Continue message or generates a gate signal that remains in the high state until a Midi Stop message occurs (selectable via jumper)
-
- Stop: outputs a pulse at each Midi Stop message
-
- Reset: outputs a pulse at each Midi Start message that follows a Midi Stop message
-
- Wait control input, can be selected by means of a jumper between Gate function or Switch function: in Gate mode the positive edge of a gate signal is used to init the Wait state, in Switch mode an external switch that connects to GND is used to init the Wait state (equivalent to Switch-Trigger)
- Wait button / Wait control input: Whenever the Wait button is operated or a positive voltage is applied to the Wait input the module waits for the next measure start until the clock signals are generated.
- LED displays for clock, "1" and start (display of Start depends upon the chosen Start mode, see above)
- output voltages can be selected between +5V and +12V by means of an internal jumper (for DIN Sync applications +5V has to be used !)
- firmware updates via USB (provided that there will be updates available)
Product Specs
- Item Number: 23171
- Make: Doepfer
- Model: A-190-8
- Condition: Brand New
- Finish: Silver
- Categories: keyboards-and-synths ⇒ eurorack
- Function: Clock Generator MIDI
- Made In: Germany
- MPN: A-190-8
- EAN: 4250711119089
- Modular Grid: Eurorack ⓘ ＋
- Dimensions*: 6 HP 50 mm deep
- Power*: 50 mA +12V 50 mA -12V ? mA 5V
* User contributed details